Feed Support Assembly - Patriot Antenna 1.8m Offset TxRx Installation & Assembly Instructions Manual

Feed Support Assembly

1. Attach Feed Support assy to the lower tube extension of the Back frame using 1/2" x 5 1/2"
bolts, nuts and washers.
2. Assemble the Feed holder and Feed Assembly as shown using 1/4" socket head cap screw
hardware.
1/4" x 1" Caphead
with nuts
Feed Assembly
Feed Holder
1/2" x 5 1/2"
bolts,nuts, washers
8
Feed
Support
Assy
Rx Port
Tx Port
Rx Port
Tx Port
Rx Port
Tx Port
Rx Port
Tx Port
Rx Port