Advertisement
R
5. Remove the screw and the clips,
then remove the parking lever,
the handle upper cover, the
handle lower cover, the front
panel and the meter cover.
6. Open a hole 30 × 26 on the meter
cover.
NOTE: • A paper pattern 30 × 26 is
given attached to this
manual. Use it for opening
holes.
• Remove the burrs com-
pletely.
7. Install the switch.
8. Pass the subwire as shown in the
right figure.
!
WARNING
• Position the wires carefully not
to prevent driving.
• Be careful not to caught the
subwire by the front fork when
steering the handlebar.
Meter Cover
Screw
Clip
Subwire
GENUINE SUZUKI ACCESSORIES
4/6
Handle Upper
Cover
Clip
Handle Lower
Cover
Front
Panel
Parking
Lever
30
60
26
40
Advertisement
