BMW F 800 GS Adventure Rider's Manual page 113

disengage chain 1 from the
sprocket.
Roll the rear wheel back until it
is clear of the swinging arm.
NOTICE
The sprocket and the spacer
sleeves on left and right are
loose fits in the wheel. Take care
when removing to ensure that no
parts are damaged or mislaid.
Install the rear wheel
WARNING
Use of a non-standard wheel.
Malfunctions in operation of ABS
and ASC.
See the information on the ef-
fect of wheel size on the ABS
and ASC systems at the start
of this chapter.
ATTENTION
Tightening threaded fasten-
ers to incorrect tightening
torque.
Damage, or threaded fasteners
work loose.
Always have the security of
the fasteners checked by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
Roll the rear wheel into the
swinging arm, making sure that
the brake disc passes between
the brake pads.
Roll the rear wheel as far
forward as possible and loop
chain 1 over the sprocket.
Place left adjusting plate 2
in the swinging arm and in-
stall quick-release axle 1 in
8
111
z