8
108
Clamp of quick-release
axle
Tightening sequence: Tighten
z
screws six times in alternate
sequence
19 Nm
If fully tightened beforehand,
slacken right axle clamping
screws 1 again.
Removing the front-wheel
stand.
OE
without centre stand
Remove the auxiliary stand.
Place the right brake calliper
and the left brake calliper onto
the brake disc.
Tighten screws 1 on left and
right to the specified tightening
torque.
Brake caliper to tele-
scopic fork
38 Nm