Page 3
Wall Mount for LED/LCD/Plasma TVs and Monitors 2. APPLICATION F41-44 is designed for wall-mounting LED/LCD/Plasma TV sets and monitors. 3. SAFETY PRECAUTIONS • Do not exceed the maximum load specified in the Manual to avoid accidents or damage. • Before installing the wall mount, read this Manual carefully and follow all the instructions when installing.
Page 4
User’s Manual 6. MOUNTING AND INSTALLATION • Choose a wall to hang your mount on. It’s recommended that the height H and the distance L from the viewer be cal- culated according to the formulas in the figures on the left.
Page 5
Wall Mount for LED/LCD/Plasma TVs and Monitors Max 1,5N·M OPEN Wood detector 13 mm • Fix the mount on the wall using dowels (see Fig. c). • Fix the mounting system on the rear panel of your TV, as shown in Fig. d, using suitable screws and washers included in the package.
Page 6
User’s Manual OPEN • To unmount your TV, release the security locks (see Fig. g). Lift your TV slightly and take the mounting system out of the holes. 7. TECHNICAL SPECIFICATIONS Parameter, measurement unit Value Diagonal compatibility, inch/cm 26 – 55/66 – 140 VESA range, mm 100 ×...
Page 7
Произведено под контролем «Свен Скандинавия Лимитед», 48310, Финляндия, Котка, Котолахдентие, 15. Сделано в Китае. Manufacturer: SVEN PTE. LTD, 176 Joo Chiat Road, № 02-02, Singapore, 427447. Produced under the control of Oy Sven Scandinavia Ltd. 15, Kotolahdentie, Kotka, Finland, 48310. Made in China.
Need help?
Do you have a question about the F41-44 and is the answer not in the manual?
Questions and answers