Power Supply; Ac Outlet Power Supply; Battery Power Supply - RCA RP2510 User Manual

RP2510 EN new 2/5/04
CD Player
EN

Power Supply

Model Number
RP2510 / RP2512
LAD1095U

AC Outlet Power Supply

(supplied with LAD1095U only)
You can power your CD player with an
AC/DC adapter. Refer to the table for
details of the operating voltage.
AC/DC adapter is purposed for indoor use
in dry rooms only. Remove the jack from
the device to use it with the batteries.

Battery Power Supply

Refer to the table for details of the
batteries required to operate your unit.
5
5:53 PM Page 10
AC/DC adapter
5-4079B (not included)
LAD70CU (Included)
(230V 50Hz)
Recharge function (LAD1095U only)
To charge Ni-Cd batteries:
1. Insert 2 rechargeable batteries into
the battery compartment of the main
unit.
2. Connect the main adapter.
3. Press stop
recharging. A battery indicator will be dis-
played when recharging is in progress.
4. Unplug the AC/DC adapter to stop
recharge, or press play to stop recharge
and enter playback mode directly.
Note:
Power is fed to the unit even
when it is not functioning. To
cut the power supply off, the AC/DC
adapter must be unplugged.
Batteries
"AA" x2 (Not Included)
2 x 1.5V IEC R6 (UM3)
(Included)
on the unit to start