Chapter 10 Error Display And Troubleshooting - Haier HW50-1010W Service Manual

SERVICE MANAUL
HW50-1010W/HW50-1010S
light of synthetic 30 ℃ on
light of quick wash on
light of cotton pre-wash on
light of cotton & flax 90 on
washing program indication
light
X.3 The model can only be selected from high spin speed to lower spin speed, once
saved, it can't reverse adjust, however, when the Temperature sensor is off, it can.

Chapter 10 Error Display and troubleshooting

10-1. The start indicator lighted on 0.2s and off 0.2s for twice, repeat 4s
later
Error 1
The start indicator wasn't lighted,and thebuzzer sound abnormally.
Error message:Door is not properly shut 20s after program is started.
Troubleshooting:
Pushing the door to Check Whether
Door is properly shut or not
Y
Cut off the power and then turn on again.
Check the voltage between brown wire
and blue wire of door lock, is it between
AC 220-240V?
N
Check if the wire connecting door lock
and PCB is loose
N
Check the voltage between 12-3 and
12-12 of PCB, is it between AC
220-240V?
Error 2
The start indicator lighted on 0.2s andoff 0.2s for twice,repeat 4s later .
Error message: Drainage error, water not emptied within 4 min.
950/960
850/860
750/760
650/660
Corresponding spin
speed
Front Load Washing Machine
Shut the door properly
N
Door lock is broken and need replacing,
then make sure wire is connected
Y
properly.
Connect the wire properly
Y
Replace
PCB
N
２２