Seiko Cal. V195 Instructions Manual page 9

Time settings for main dial and alarm/world time sub dial
l
CROWN
Second click
Small second hand
Second click
16
Pull out to the second click when the
CROWN
small second hand is at the 12 o'clock
t
position.
The small second hand will stop
immediately.
• If the crown is pulled out while the
stopwatch is counting, the stopwatch will
be automatically reset.
• This operation can be performed both in
the POWER RESERVE DISPLAY mode
and STOPWATCH mode.
Turn to set the main dial time.
CROWN
It is recommended that the hands be
set to a time a few minutes ahead of the
current time, taking into consideration
the time required to complete the
adjustment for city hand and alarm/
world time sub dial, after which the
crown is to be pushed in.
◆ At the moment when the main dial time indicates 12 o'clock midnight, the date
changes. When setting the time, make sure that AM/PM is set correctly.
◆ When setting the minute hand, first advance it 4 to 5 minutes ahead of the desired
time, and then turn it back to the exact time.
Main dial
Second click
A
B
Alarm/world time
sub dial
City (time zone
City hand
CROWN
index)
Press to set the city hand to point at the
A
city in the same time zone with the main
dial time.
t
With each press of button A, the city hand
advances by one city. Do not hold the button
after pressing it.
Press to set the alarm/world time sub dial
B
time to the current time in the 24-hour format.
• With each press of button B, the alarm/world
time sub-dial time is advanced by one minute.
• The hands move quickly if button B is
continuously pressed.
• Make sure that the alarm/world time sub-dial
time is set to exactly the same time as the
main dial time, which has been previously
set, in the 24-hour format.
t
After time setting for the main dial and
adjustment for the city hand and alarm/
world time sub dial are complete, push
in to the normal position.
17