Headset Connection - Motorola EWP1000 Quick Start Manual

PTT and stereo headsets
Use your headset jack to plug in an
optional hands-free PTT headset.
Warning
: When using a headset,
you may not hear the surrounding
sounds. Do not use a headset
where it can endanger your safety.
First time connection of Bluetooth headset
• The headset must be charged prior to starting
• Bluetooth headset must be turned Off.
1. To turn on Bluetooth: press
Connections > Wireless Manager
Enable Bluetooth
in the Home screen.
2. From the Home screen, press:
Programs > Bluetooth > Bluetooth Manager >
Hands-free.
3. Place the headset in pairing mode (Refer to the
Bluetooth Pairing Instructions included with the
headset.). When using Motorola headset, press
Start > Settings >
and check the
h
box. The indicator appears
Start > All

Headset Connection

and hold the Call button of the headset for 5
seconds. The indicator light turns on and remains
steady. If the indicator light is flashing or does
not remain steadily lit, turn off the headset and
repeat this step.
4. Press: Add. The smartphone prompts you to
verify your headset is ready.
5. Press: Search. The smartphone starts searching
for your headset and shows it on the screen.
6. Press: Select to connect the headset.
7. When prompted, enter the device passkey
provided with your headset (such as 0000) and
press Accept.
When your headset successfully pairs, the indicator
light changes from steady to flashing blue. After
you have successfully paired your smartphone and
headset, you do not need to repeat these steps.
To pair the headset again, verify that your
smartphone's Bluetooth is enabled (See step 1.) and
turn on the headset.
11
English