Return The Extender To Its Factory Settings; Use The Factory Reset Button To Restore Factory Settings; Erase The Settings And Return To Factory Settings - NETGEAR EX7300 User Manual

Return the Extender to Its Factory Settings

To reset the extender to its factory settings, you can use the Factory Reset button or log in to
the extender and reset it to factory settings. For information about the factory settings, see
Factory Default Settings

Use the Factory Reset Button to Restore Factory Settings

CAUTION:
This process erases any settings that you have configured in the extender.

To restore factory settings:
1. Insert a paper clip into the Factory Reset hole and hold it until the Power LED blinks
amber.
2. Release the button.
All the LEDs turn off for about 3 seconds.
The Power LED lights solid amber for about 30 seconds.
The Power LED
The extender returns to its factory settings.
When you plug in the extender, it detects the position of its Access Point/Extender switch.
Log In to the Extender and Reset to Factory Settings
CAUTION:
This process erases any settings that you configured in the extender.

To log in to the extender and reset it to factory settings:
1. On your WiFi-enabled device, open the WiFi connection manager and locate and
connect to the new extender WiFi network.
2. Launch a web browser.
3. Enter www.mywifiext.net in the address field of the browser.
A login window opens.
4. Enter your user name and password and click the LOG IN button.
The Status page displays.
Nighthawk X4 AC2200 WiFi Range Extender
on page 47.
lights solid green.
Monitor and Maintain the Extender
39