Advertisement
SLIDE RELEASE Switch
Earphone Jack (Monaural)
Connect the earphone (M3 type, not
supplied) to the earphone jack for monitor-
ing the sound during playback or recording.
Power Indicator
Power Swit
LCD (Liquid Crystal Display) Monitor
Audio/Video
Input PI Jg
Battery Release
DO Input Connector
Underside
Built-In Speaker and Volume Control
For monitoring the sound during playback
or recording. You can adjust the sound by
rotating the volume control down for
maximum or up for minimum.
Note:
If you hear a howling sound (feedback)
while monitoring the recording, turn the
volume down.
Bright Control
Adjusts the brightness of the picture.
*Tint control
Adjusts the tint for natural fieshones.
*Color Control
Adjusts the color intensity.
*Note: These controls have been set at the
factory. It is not necessary to adjust these
controls under normal circumstances.
But,
should it become necessary, be careful to
make the adjustment
with a small, slender
screwdriver
so as not to damage the
miniature control.
3
Advertisement
