System Setting; Setup; Progressive Scan; Adjust The Settings - LG DVX690 Owner's Manual

3
12

System Setting

Setup

When the unit is turned-on at the first time, you
have to select the desired language. (optional)

Adjust the settings

You can change the settings of the player in the
[SETUP] menu.
1. Press SETUP.
2. Select the first setup option using ws and
press d to move to the second level.
3. Select a second setup option using ws and
press d to move to the third level.
3
4. Select a desired setting using ws and press
ENTER to confirm.
5. Press SETUP to escape from setup menu.

[LANGUAGE] Menu

Menu Language/Disc Audio/Disc
Subtitle/Disc Menu
Select and set the language you prefer.

[DISPLAY] Menu

TV Aspect
Select and set TV aspect ratio according to your TV
type and preference.
[4:3]: Standard TV type
[16:9]: Wide TV type

Display Mode

Select and set Display Mode according to your
preference. Display Mode works only when the TV
Aspect mode is 4:3.
[Panscan]: Display full screen with cut non-
main scene on TV
[Letterbox]: Display wide screen with black
stripe at top and bottom on TV
Downloaded From DvDPlayer-Manual.com LG Manuals
System Setting

Progressive Scan

Check whether your TV can accept the progressive
signal. If your TV accepts it, you can enjoy accurate
color with high quality by selecting [On].
If there is any error after setting to Progress Scan,
you have to initialize the unit by pressing and
holding STOP for five seconds.

TV Output Select

Select an option according to the TV connection
type.
[RGB]: When your TV is connected with the
SCART jack.
[YPbPr]: When your TV is connected with the
Component Video Out jacks on the unit.

[AUDIO] Menu

Set the player's Audio options according to various
disc output type you use.
Dolby Digital / DTS / MPEG
Select the type of digital audio signal to use the
DIGITAL AUDIO OUT jack.
[Bitstream]: Select to connect DIGITAL AUDIO
OUT jack to an amplifier with Dolby Digital, DTS
or MPEG decoder.
[PCM] (for Dolby Digital / MPEG): Select
to connect DIGITAL AUDIO OUT jack to an
amplifier without Dolby Digital or MPEG
decoder.
[Off] (for DTS): Select to connect DIGITAL
AUDIO OUT jack to an amplifier without DTS
decoder.
Sample Freq. (Frequency)
Selects the sampling frequency of the audio signal
between [48KHz] and [96KHz].