ReelSonar iBobber User Manual page 14

SYNCING IBOBBER (3 OF 3)
Note 1:
The first time you use the iBobber you'll pair the iBobber (nickname) with your
phone. If you and a bunch of friends are syncing for the first time, you'll need
to do it separately — cast yours into the water, sync, then your pal casts
theirs, syncs, then another friend can cast, etc.
After your first sync, your iBobber/app remembers your nickname so using
the iBobbers together is not an issue.
Note 2:
While your phone will remember your iBobber, and your friends phone will
remember his iBobber, if you're out and forget your phone, or vice versa, you
can connect with your friends iBobber, or theirs with yours. However, when
connected to theirs, you won't be able to connect with your own at the same
time, etc. One iBobber to one device at a time. What can we say?
We're old fashioned that way.
Note 3:
When fully charged, the iBobber turns on when first disconnected from the
charger and remains on for 25 minutes. This is for when you need need to
update the firmware (page 25)
13