Extension Table - ELNA 683, 686 Service Manual

EXTENSION TABLE

1. Loose the two screws A.
1. Remove the screw cap D with a
1. Pull out the cutter dial. Protect with
Replace the cutter dial.
1. Place the cutter dial so that the button
2. Tighten the cutter dial and place the
1. Unscrew the two screws F.
2. Push the base plate downwards and
2
needle.
small fabrics the cutter dial when the
cutter dial is pinched and pull them
out.
can turn and all numbers from 5 to 7
are facing to the red arrow on the
window.
screw cap.
remove the extension table.