Connecting And Disconnecting A Usb Memory/ Portable Device; Loading An Sd Card - Subaru 2017 Legacy Owner's Manual

BASIC INFORMATION BEFORE OPERATION
CONNECTING AND
DISCONNECTING A USB MEMORY/
PORTABLE DEVICE
CONNECTING A DEVICE
1.
Connect a device.
AUX USB
● Turn on the power of the device if it is not turned on.
NOTE
Compatible USB memory: →P.106
l
Compatible iPod: →P.106
l
This unit does not support commercially available USB hubs.
l
By connecting a device such as a cellular phone, charging starts
l
depending on the device.
42
LOADING AND REMOVING AN
SD CARD (WITH NAVIGATION
FUNCTION)

LOADING AN SD CARD

CAUTION
l Position the SD card with the "▲" mark at the far end and
insert it until it clicks into place. When contact is made with the
stopper inside, the card cannot be inserted any further. Do not
try to forcibly push the card.
l Do not insert anything other than an SD card into the slot.
l Do not pull the SD card slot cover with force. By doing so, the
SD card slot cover may come off, or be damaged. If the SD
card slot cover comes off, it can be reattached by inserting the
cover clip into the hole.
l Avoid touching the SD
contamination. Doing so may cause card read failure.
card terminals to prevent