Receiving A Call; Operations During A Call - Kenwood DNX893S Instruction Manual

Bluetooth Control

Receiving a call

1
Touch [ ] to answer a phone call or
[ ] to reject an incoming call.
NOTE
• While monitoring the view camera, this screen
does not appear even if a call comes in. To display
this screen, press the <TEL> button or return the
shift knob of car to the driver position.

Operations during a call

Adjust the volume of your voice
1 Touch [Speech Quality].
2 Touch [T] or [U] of [Microphone Level].
74 74
Adjust the receiver volume
Press the <S> or <R> button.
Turn the volume knob.
Mute your voice
Touch [ ] to mute or not to mute your
voice.
Output the dial tone
Touch [DTMF] to display the tone input screen.
You can send tones by touching desired keys
on the screen.
Switching the speaking voice output
Touching [ ]/ [
switches the speaking voice output between
cell-phone and speaker.
Call-waiting
When you receive a call while talking on
another call, you can answer the newly
received call by touching [
is on hold.
Each time you touch [
change.
When you touch [ ], the current call will end
and switch to the call in hold.
[ × ]
The Hands-Free popup screen is closed. To
display it again, touch [
] each time
]. The current call
], the caller will
].