Kenwood DNX893S Instruction Manual page 15

Basic Operations
SD card
1
Press the <G> button.
2
Touch [OPEN] to the panel fully
opens.
3
Insert the SD card into the slot
until it clicks.
4
Press the <G> button.
5
Press the <HOME> button.
6
Touch [SD]. (P.16)
● To remove:
1
Press the <G> button.
2
Touch [OPEN] to the panel fully
opens.
3
Push the SD card until it clicks and
then remove your finger from the
card. The card pops up so that you
can pull it out with your fingers.
4
Press the <G> button.
14 14
DNX693S/ DNX573S
1
Insert the microSD card into the
slot until it clicks.
2
Press the <HOME> button.
3
Touch [SD]. (P.16)
● To remove:
Push the microSD card until it clicks and
then remove your finger from the card. The
card pops up so that you can pull it out
with your fingers.
NOTE
• A dummy microSD card is inserted as the slot
cover. Remove it before using and keep it in an
appropriate place.
HDMI/ MHL source
You can display the screen of smartphones
connected via the HDMI/MHL input terminal.
1
Press the <HOME> button.
2
Touch [ ].
3
Touch [HDMI/ MHL].
4
Start an application or playback
on your smartphone.
● About Wireless Display Adapter:
This unit is compatible with Wireless
Display Adapter. Connecting a Wireless
Display Adapter (KCA-WL100: optional
accessory) to the HDMI/MHL input
terminal enables you to enjoy listening
to music, watching videos, or viewing
pictures over a wireless connection.
NOTE
• For details about Wireless Display Adapter
settings, etc., refer to the instructions supplied
with the Wireless Display Adapter.
(P.16)