General Information; Pre-Disassembly Instructions; Disassembly Process - Packard Bell dot s series Service Manual

General Information

Pre-disassembly Instructions

Before proceeding with the disassembly procedure, make sure that you do the following:
1. Turn off the power to the system and all peripherals.
2. Unplug the AC adapter and all power and signal cables from the system.
3. Place the system on a flat, stable surface.
4. Remove the battery pack.

Disassembly Process

The disassembly process is divided into the following stages:
External module disassembly
•
Main unit disassembly
•
LCD module disassembly
•
The flowcharts provided in the succeeding disassembly sections illustrate the entire disassembly sequence.
Observe the order of the sequence to avoid damage to any of the hardware components. For example, if you
want to remove the mainboard, you must first remove the keyboard, then disassemble the inside assembly
frame in that order.
Main Screw List
M2*4 Ni
M2*4
M2*8
M2*3
M3*3 Ni
38
Downloaded from LpManual.com Manuals
Screw Quantity Part Number
2 86.WH202.001
7 86.WH202.002
11 86.WH202.004
26 86.WH202.005
4 86.WH202.006
Chapter 3