Upgradeability; Processor; Memory - TRIGEM Napoli-2 User Manual

2. Upgradeability

This section describes the major specification of user upgrade parts. CPU, Memory, and extension slot will provide
a user to upgrade the overall performance by adding or changing these parts with other higher.
CPU : Pentium II processor 233/266/300/333/366MHz and Pentium III processor 350/400/450/500/550MHz
Memory : EDO, SDRAM Modules (2bank, 16MB-256MB)
Expansion slot : Three master PCI and One ISA slot One shared, One AGP slot
2-1.

Processor

This motherboard supports a single Pentium II processor or Pentium III processor. The processor's VID pins
automatically program the voltage regulator, which is on the motherboard for the required processor voltage. The
motherboard supports processors that run internally at 300/333/300/350/400/450/500/550MHz, and have a
512Kb second level cache.
Packing
Expansion slot : Three master PCI and One ISA slot One shared, One AGP slot
2-2.

Memory

The motherboard has two, dual inline memory module (DIMM), minimum 16MB to maximum 256MB memory
size. The BIOS can automatically detect the memory type, size, and speed through SMBUS interface between
the core chipset and DIMM module.
The motherboard supports the following memory features
•
3.3V and unbuffered168-pin DIMM
Voltage detection
Unbuffered detection
•
66MHz and 100MHz unbuffered SDRAM, and also EDO DRAM
•
Non-ECC memory and ECC memory support
•
Single or double-sided DIMM with the following types
DIMM size
16MB
32MB
64MB
128MB
3.3V Version
Unbuffered
Non-ECC memory
2Mbit * 64bit
4Mbit * 64bit
8Mbit * 64bit
16Mbit * 64bit
5 / 12
5V Version
Buffered
ECC memory
2Mbit * 72bit
4Mbit * 72bit
8Mbit * 72bit
16Mbit * 72bit