Advertisement
Do not allow objects to touch the fan blades when the fan is in operation.
Do not operate without fan blades safely secured.
Do not use outdoors.
To disconnect, switch off the mains then disconnect wiring.
Do not try to over extend or stretch the mains cable.
Never attempt to open any part or dismantle the controls. Responsibility for
failure cannot be accepted if this instruction has been ignored.
This product is intended for household use only. Industrial or commercial use
invalidates the warranty.
NOTE: It is recommended that this fan should be installed by a qualified electrician.
WIRING INSTRUCTION & DIAGRAMS
There are four colour wires coming from the top of the motor and two earth wires
coming from the downrod and the bracket respectively.
BLUE
BLACK
WHITE
GREEN
FOR THE CONNECTION OF THE FAN & LIGHT KIT AT FAN LOCATION
1. Connect the black wire to the power supply live wire.
2. Connect fan white wire to the power supply neutral wire
3. Connect fan earth wires to the power supply ground wire.
4. Connect the blue fan wire to the light live wire
- LIGHT CONNECTION (LIVE)
- FAN MOTOR CONNECTION (LIVE)
- NEUTRAL
- EARTH WIRE
3
Advertisement
