Playback Function Screen - Panasonic DV PROLINE AG-DVC30 Menu Information

Menu configuration

PLAYBACK FUNCTION screen

Item/
(Display
Description of settings
mode)
SEARCH Use this to set the operation to be
(VCR) performed when an INDEX button ( 9 or
: ) on the remote control unit is pressed.
PHOTO:
A photo search is conducted. (P53)
SCENE:
An index search is conducted. (P53)
32K (12bit) Use this to set the sound to be output as
AUDIO CH1 and CH2 signals when playing back a
(VCR) tape that was recorded in the 32K (12-bit)
audio mode.
ST1:
This selects the sound that was recorded
during shooting.
CH1 signals = CH1 track
CH2 signals = CH2 track
ST2:
This selects the sound that was dubbed
on the recording.
CH1 signals = CH3 track
CH2 signals = CH4 track
MIX:
This mixes the sound that was recorded
during shooting and the sound that was
dubbed on the recording.
CH1 signals = CH1 + CH3 tracks
CH2 signals = CH2 + CH4 tracks
<Note>
When sound is recorded in the 48K (16-bit)
audio mode, CH3 and CH4 do not exist so
the following always stands:
CH1 signals = CH1 track
CH2 signals = CH2 track
The underlining indicates the factory setting.
32K (12bit) AUDIO item/AUDIO OUT item settings and audio track signals output from
the AV IN/OUT jack
32K (12bit) AUDIO
Audio recording
mode
32K (12-bit)
48K (16-bit)
74
(cont.)
AUDIO OUT
item setting item setting
CH1•CH2
ST1
CH1•CH2
ST2
MIX
CH1•CH2
__
Item/
(Display
mode)
AUDIO OUT Use this to set the audio signals to be
(VCR) output from the AV IN/OUT jack when the
tape is played back.
CH1•CH2:
CH1:
CH2:
AV IN/OUT jack
CH1 output
CH1
CH1 CH1
CH2 CH2
CH3
CH1 CH3
CH2 CH4
__
CH1+CH3
CH1
CH1 CH1
CH2 CH2
Description of settings
CH1 output = CH1 signals
CH2 output = CH2 signals
CH1 output = CH1 signals
CH2 output = CH1 signals
CH1 output = CH2 signals
CH2 output = CH2 signals
AV IN/OUT jack
CH2 output
CH2
CH1
CH2
CH4
CH3
CH4
CH2+CH4
CH2
CH1
CH2