G0/G1 Ccd Camera Driver For Sips; Camera Connection - Moravian Instruments G0 Operating Manual

SIPS package already contains this file containing all included drivers. This
file is not modified programmatically, so it is necessary to edit it manually
if a new device driver, not included into basic package, is to be installed.
User-specific configuration is stored in the file named also "sips.ini", but
this file is placed in the "\Documents and Settings\%user_name
%\Application Data\SIPS\" folder. Number of setting is stored in this text
file, beginning from the position and open state of individual tool windows,
to the preferred astrometry catalog and parameters for searching stars in
images.

G0/G1 CCD Camera Driver for SIPS

SIPS is designed to work with any CCD camera, providing the driver for the
particular camera is installed. The drivers for G0/G1 CCD cameras are
included into SIPS package – it is not necessary to install it separately.
Both G0/G1 cameras use common driver 'gxusb.dll' when connected
directly to the host computer or 'gxeth.dll' when connected trough the Gx
Camera Ethernet Adapter.
Common drivers for all Gx cameras were introduced in SIPS version 2.3,
previous SIPS versions used different drivers for G0/G1 and for G2/G3/G4
cameras. G0 and G1 cameras used the 'g1ccd.dll' driver, but it was replaced
with the 'gxusb.dll' common driver.
G0 cameras are supported from version 2.0 of SIPS. Previous versions did
not support G0 cameras.
The G0/G1 camera requires no configuration. The driver is capable to
recognize all G0 and G1 cameras connected to the computer and to provide
necessary information to the SIPS software package.

Camera Connection

Camera connection is pretty easy. Plug the camera to the computer USB
port using the supplied USB cable.
26