Chapter 5. Important Notes; Packing Requirement For Sending The Pcb Assembly; Short Of Spare Parts While Repairing A Speaker - Genius GHT-511D Service Manual

Service Manual

Chapter 5. Important Notes

Packing requirement for sending the PCB assembly

PCB assembly is a kind of sophisticated electronic circuit board. Therefore, well packing will
be required when sending them by post or courier.
1. Some sophisticated IC components are mounted on the PCB assembly, hence it is
necessary to pack each PCB assembly with a separate static protecting beg, in order to
avoid static electricity.
2. Reliable external packing is also very important when sending the PCB assembly by post,
in that it would avoid unnecessarily lost or damage.

Short of spare parts while repairing a speaker

If you are short of spare parts when you have some speakers waiting to be repaired, it would be
recommended to take the necessary parts from one speaker, so that you may have the as many
as speakers be repaired and sent back to your customer, and left only one or few speakers
waiting for spare parts sending from KYE.
Version 1.0 Page 11