Plantronics SAVI 410 Quick Start Manual page 3

USB adapter (D100)
Power
Charger Base
Indicator Light
Carrying Case
Microphone
4
Subscription button
Indicator light
Base power supply
Base Stabiliser
Volume Button
Indicator Light
Call Control Button
Mute Button
Headset
1 Connecting USB Adapter to PC
1-1. Insert the USB adapter into USB Port on PC. The indicator light on the USB adapter will
be solid red to indicate the USB adapter is powered on and will turn solid green when it finds
the headset.
1-2. The USB adapter can be folded as shown.
NOTE The headset may need to be charged before the USB adapter can find it.
2 Assembling base and connecting power supply
2-1. Separate the top from the bottom of the charger base.
2-2. Attach the base stabiliser to the base, then re-attach the top.
2-3. Connect the power supply to the base, then connect the power supply to an outlet.
The power indicator light will be solid green.
3 Docking and Charging Headset
3-1. Gently push the headset into the charging cradle. The
indicator light on the headset will flash green to indicate that
the headset battery is charging.
3-2. Charge for at least 20 minutes prior to the first use.
A full charge takes 4.5 hours.
4 Loading software
4.1 Load Plantronics software by visiting
download button.
5 Making a Test Call
5-1. While wearing your headset, press the call control button on the headset. The USB
adapter indicator light will flash green indicating a radio link is active with the headset.
5-2. Place a test call using your softphone or UC application.
5-3. Adjust the receive and transmit volume to comfortable levels using the volume
control in your softphone or UC application audio set up.
5-4. You can fine tune the listening volume on the headset by pressing the volume up
button [+] to increase the volume and the volume down button [–] to decrease the
volume.
CHARGING TIME
20 min .....................
Minimum charge
before first use
4.5 hours ................
Full charge
plantronics.com/software and click on the
5