Dismounting The Unit - Sony XR-1947 Operating Instructions Manual

Dismounting the unit

1
While pushing in on the left side of the
front cover, insert the tip of a thin
screwdriver as shown in the illustration,
then pry off the front cover.
Thin screwdriver
(Be careful to not break the front cover.)
2
Repeat step 1 on the right side. Then the
front cover will be removed.
3
Use a thin screwdriver to push in the clip
on the left side of the unit, then pull out
the left side of the unit until the catch
clears the mounting.
4
Repeat step 3 on the right side.
5
Slide the unit out of the mounting.
Actual total number:
Sony XR-1947 (E) 3-858-377-11 (2)
EN
9