Neilsen CT2207 User Manual page 5

Assembly Step
1. As per Pic. 3, insert two Hex Bolt M6X35 with Big Flat Washer Ø6 from the inner hopper and a
leg, then locked by two Wing Nut M6. Tighten the nuts.
2. Using the same way to assemble the other leg. See Pic.4.
Assembly Step
1. As per Pic.5, assemble a Connect Pole onto the top of leg and locked by a Carriage Bolt
M6X35 and a Wing Nut M6.
2. Use the same way to assemble the other Connect Pole. See Pic. 6.
Page 4