Rear Panel - Inter-m LM-618 Operation Manual

Rear Panel

Rear Panel
1. LINE INPUT
This is for the connection for the equipment intended for monitoring.
2. DC INPUT TERMINALS
Connect a +24V DC battery source to these terminals. Make certain the red terminal is connected to the
battery's positive (+) side, and the black terminal to the battery's negative (-) side.
3. LINE OUTPUT
This Jack is for supplying the signal from the power amp with a line output by by-passing the line input signal.
The signal to channel 1 goes directly to the line output without any attenuation.
LINE MONITOR
5
LM-618