Summary of Contents for Inter-m LM-618
- Page 1 Operation Manual Line Monitor LM-618 * Rack mount products in the Western Hemisphere(North America, South America, and the Caribbean) do not have handles installed due to customer preference.
- Page 2 A personal welcome to you from the management and employees of Inter-M All of the co-workers here at Inter-M are dedicated to providing excellent products with inherently good value, and we are delighted you have purchased one of our products.
-
Page 3: Table Of Contents
LINE MONITOR Contents Contents Unpacking ............................2 Installation Environment............................2 Important Safety Instructions......................2 Features ............................3 Operation ............................4 Front Panel ............................4 Rear Panel ............................5 Applications ............................6 Block Diagram ..........................7 Specifications ..........................8 Service Procedures............................9 Schematic ............................9 Parts List ............................9 Warranty ............................9 LM-618... -
Page 4: Unpacking
LINE MONITOR Unpacking Unpacking Although your LM-618 is neither complicated nor difficult to operate, we recommend you take a few minutes to read this brief manual and familiarize yourself with the important information regarding product features, setup and operation. As with most electronic devices, we strongly recommend you retain the original packaging. In the unlikely event the product must be returned for servicing, the original packaging (or reasonable equivalent) is required. -
Page 5: Features
The status of each input signals can be checked by highly qualified monitor speaker that offers loud and clear sound. Operation Operation 1. Unit starts to work when the power switch on the rack is turned on. 2. Please choose the channel needed to be checked and adjust the sound level and tune, then start monitoring. LM-618... -
Page 6: Front Panel
The selected channel signal is amplified by the internal amplifier and it operates the monitor speaker. The level of the signal can be increased when the rotator for the channel volume is turned clockwise and decreases when turned counter-clockwise. LM-618... -
Page 7: Rear Panel
(+) side, and the black terminal to the battery’s negative (-) side. 3. LINE OUTPUT This Jack is for supplying the signal from the power amp with a line output by by-passing the line input signal. The signal to channel 1 goes directly to the line output without any attenuation. LM-618... -
Page 8: Applications
LINE MONITOR Applications Applications MIXER LM-618 AMP 4 AMP 3 AMP 2 AMP 1 LM-618... -
Page 9: Block Diagram
LINE MONITOR Block Diagram Block Diagram LM-618... -
Page 10: Specifications
LINE MONITOR Specifications Specifications LM-618 Frequency Response 20Hz~20kHz( 1dB) Better than 95dB Input Sensitivity Monitor Speaker Output Power 3.4V/8Ω Operation Temperature -10°C ~ +40°C Power Source 24V DC Power Consumption 350mA Weight (SET) 4.6kg/10.1lb Dimensions (SET) 482(W)x88(H)x380(D)mm /19(W)x3.5(H)x15(D)in * Specifications and design are subject to change without notice. -
Page 11: Service
To obtain specific warranty information and available service locations contact Inter-M directly or the authorized Inter-M Distributor for your specific country or region. - Page 12 Inter-M, Ltd. (Korea) began operations in 1983. Since then, Inter-M has grown to become one of the largest manufacturers of professional audio and commercial sound electronics equipment in the world. Inter-M has gained worldwide recognition for its own branded products, as well as private label manufacturing of electronics sold under other names (OEM).