Configuring The Printer - Toshiba E-Studio 2802A Software Installation Manual

3.INSTALLATION IN MAC OS X
 Configuring the printer
After you copy the PPD file to the library folder in the System Folder, you can configure the printer.
The equipment supports the following Mac OS X print services:
 LPR printing
 P.29 "Configuring LPR printing"
 IPP printing
 P.31 "Configuring IPP printing"
 USB printing
 P.33 "Configuring USB printing"
LPR printing and IPP printing are available when the equipment and your computer are connected over
TCP/IP network.
 Configuring LPR printing
The screens for Mac OS 10.10.x are used in this section.
 When you use Mac OS X 10.7.x - 10.9.x, configure the printer in the same way as you do in Mac OS X
10.10.x.
 When you use Mac OS X 10.6.x, open [Print & Fax] from [System Preferences] and configure the
printer referring to the procedure below.
1
Open System Preferences and click [Print & Scan] (for Mac OS X 10.7.x or 10.8.x) or
[Printers & Scanners] (for Mac OS X 10.9.x or 10.10.x).
2
Click [+].
3 INSTALLATION IN MAC OS X
Installing the Printer in Mac OS X 29