Replacing The Light Bulbs - Maestro MBL530B User Manual

2. Using a stainless steel cleaner to bring back the glow of the stainless steel finish.
3. Clean the filter once a week or according to usage. Press the buckle of the filter slightly, remove it and
wash in the dishwasher or into warm soapy water using a mild detergent, wipe it and replace the filter
once it's dry.
4. Clean the motor fan and other inside parts twice a year. Consult a qualified technician.
5. Do not clean motor with water or other liquid.
TO REPLACE A LIGHT BULB
MSP530BS
CAUTION: LIGHT MAY BE HOT! WAIT UNTIL THE UNIT HAS COOLED BEFORE REPLACING THE LIGHT BULB.
Caution: LED lamp cannot be replace with a different bulb, replace it a new LED light. Make sure all the
control switches are off, and the hood is disconnected.
Please follow the instructions below (model MBL530B)
1. Take out the filters, and disconnect the wire connection of the light.
2. Press the spring according to the arrow direction, then you can take off the light.
3. Warning: you can only replace with a new LED light with the same rating
4. Insert the light in reverse direction. Reconnect the wire.
5. Replace the filters.
Please follow the instructions below (model MSP530BS)
1. Unscrew the Stainless Steel plate (from the back) and disconnect the wire connection of the light.
2. Press the spring according to the arrow direction, then you can take off the light.
3. Warning: you can only replace with a new LED light with the same rating
4. Insert the light in reverse direction. Reconnect the wire.
5. Replace Stainless Steel plate.
MBL530B