DIGITALTerminal
1.Open the terminal cover with
your finger nail.
2.Insert the connector until it clicks.
3
Set the camera's mode switch to
4
Press the ON/OFF button until the
power lamp lights green.
Windows
Proceed to steps 5 and 6 below.
Macintosh
Refer to the Software Starter Guide and
download images.
Downloaded From camera-usermanual.com Canon Manuals
Always grasp the
connector to remove
the interface cable from
the camera's DIGITAL
terminal.
.
5
Select [Canon CameraWindow] in
the events dialog that appears on
the computer and click [OK] (first
time only).
If the events dialog fails to appear, click the
[Start] menu, followed by [Programs] or
[All Programs], [Canon Utilities],
[CameraWindows], and [CameraWindow -
Set Auto-Launch].
Various Functions
107