Table of Contents
Advertisement
After massage
21
Restoration of massage chair
Make sure there is no people or pet or anything
1
within the range of backrest and legrest.
2
Make sure backrest and legrest return to
restoring position by operating the relevant
button.(This position can also be achieved
by pressing on/off batton.)
Or
On/off
After restoring, put the controller back to the
3
controller holder.
Put the back mat and pillow away on the backrest.
4
Switch off the power.
5
5
Unplug the electricity from the socket.
6
(Attention: hold the right plug position)
Clean the chair if necessary.
7
Attention!
After using, press ON/OFF to end all the
massage method and wait for restoration.
Make sure to cut the electricity to avoid any
unexpected hurt to children or pets.
After using, turn off the power, unplug the
electricity. Avoid moisture, dirt and aging
of insulation in case of causing damage.
Clean and Maintenance
Synthetic leather
General cleaning
Clean with tidy, soft and dry cloth slightly.
(
Chemical or medical
cleaning products are
)
forbidden
If leather is dirty
Dip soft cloth into 3-5% neutral detergent
1
solution, squeeze it then clean the stain on
the surface gently.
2
Wash cloth, squeeze it and wipe with
detergent.
1
2
3
3
Clean it softly with dry cloth.
allow to dry (air blower is prohibited)
4
Cloth material
Dip cloth into weak neutral
1
detergent, squeeze it and clean
the material surface.
1
(
,
,
Diluent gas alcohol
)
are prohibited
2
Brush the dirty parts with weak
2
neutral detergent. (avoid excessive
brushing)
Excessive cleaning may cause
3
damage to cloth material.
Wipe with water-dipped but
3
squeezed cloth.
Allow to dry.
4
Plastic parts
Dip cloth into neutral detergent,
1
squeeze it and clean.
2
Wipe with water-dipped but
squeezed cloth.
3
Allow to dry.
Clean the controller
Wipe with soft cloth after squeezing.
1
2
Allow to dry.
1
Propellant, diluent or
alcohol are prohibited.
remote control
About cleaning
Before cleaning, unplug the electricity,
'
don t touch plug with wet hands.
Make sure hands are dry when plugging
to the socket.
If failed to follow the mentioned instruction,
user may get electric shock or burned.
22
Advertisement
Table of Contents
