MSI B150M NIGHT ELF Quick Start Manual page 42

Restore after AC Power Loss [Power Off]
▶
Sets the system behaviors while encountering the AC power loss.
[Power Off]
[Power On]
[Last State]
On board LED Control [On]
▶
Enables or disables the actions of onboard LEDs.
[On]
[Off]
▶ Windows OS Configuration
Sets Windows 8/ 8.1 detailed configuration and behaviors. Press <Enter> to enter
the sub-menu.
▶ Windows 8.1/ 10 WHQL Support [Disabled]
Enables the supports for Windows 8.1/ 10 or disables for other operating systems.
Before enabling this item, make sure all installed devices & utilities (hardware &
software) should meet the Windows 8.1/ 10 requirements.
[Enabled]
[Disabled]
▶ MSI Fast Boot [Disabled]
MSI Fast Boot is the fastest way to boot the system. It will disable more devices to
speed up system boot time which is faster than the boot time of Fast Boot.
[Enabled]
[Disabled]
Important
When MSI Fast Boot is enabled, you can use FAST BOOT application to enter BIOS
setup if needed. Please refer to page 35 for Entering BIOS Setup.
▶ Fast Boot [Disabled/ windows7, Enabled/ windows 8.1/ 10]
Enables or disables the fast boot feature for Windows 8.1/ 10. This item will only be
available when MSI Fast Boot is disabled.
[Enabled]
[Disabled]
▶ Internal GOP Configuration
Manages the onboard Graphics Output Protocol (GOP). Press <Enter> to enter
the sub-menu. This sub-menu appear when Windows 8.1/ 10 WHQL Support is
enabled.
42
BIOS Setup
Leaves the system in power off state after restoring AC power.
Boot up the system after restoring AC power.
Restores the system to the previous state (power on/ power off)
before AC power loss.
Enables the actions of onboard LEDs.
Disables the actions of some LEDs.
The system will switch to UEFI mode to meet the Windows
requirement.
Disables this function.
Enables the MSI Fast Boot function to speed up booting time. And
the following Fast Boot field will be disabled and fixed.
Disables MSI Fast Boot.
Enables the Fast Boot configuration to accelerate system boot time.
Disables the Fast Boot configuration.