Installing the Cowl
Drilling the holes for the cowl retaining screws
Use paper masking tape to attach the drilling templates (39) over the captive nuts in the fuselage (2).
Attention!
!
Ensure that the hole in the drilling template (39) is centred accurately on the captive nut, and
offset towards the cowl (40) by about 2 mm. This compensates for the thickness of the cowl
(40); the drilling template (39) will be positioned exactly over the captive nuts once the cowl
(40) is fitted on the fuselage.
Place the canopy (41) on the fuselage (2) and lock it
in place using the spring latch. This is important, to
ensure that the cowl (40) is positioned correctly.
54