Currys Essentials C1DVD11 Instruction Manual page 28

Batteries
• Batteries used in the remote control for this
unit are easily swallowed by young children
and this is dangerous.
• Keep loose batteries away from young
children and make sure that the battery
holder tray is secure in the remote control.
Seek medical advice if you believe a cell
has been swallowed.
• Please dispose of batteries correctly by
following the guidance in this manual.
Supervision
• Children should be supervised to ensure
that they do not play with the unit and the
remote control.
• Never let anyone especially children push
anything into the holes, slots or any other
openings in the case - this could result in a
fatal electric shock.
DVD
Class 1 Laser Product
•
• This unit utilises a
laser. Use of controls,
adjustments or
performance of
procedures other than those specified
herein may result in hazardous radiation
exposure.
• Before moving the unit, ensure the disc
tray is empty.
• Always remove the disc when the unit is
not in use.
• Failure to do so will risk severely damaging
the disc and the unit.
• Do not stack devices, heat from other
devices may affect the performance of the
unit.
28
Service
• To reduce the risk of electric shock, do not
CLASS 1
LASER PRODUCT
• Do not open any fixed covers as this may
Maintenance
• Ensure to unplug the unit from the mains
• Do not use any type of abrasive pad or
• Do not use liquids to clean the unit.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead
symbol, within an equilateral
triangle, is intended to alert the
user to the presence of uninsulated
"dangerous voltage" within the
unit's enclosure that may be of
sufficient magnitude to constitute a
risk of electric shock.
The exclamation point within an
equilateral triangle is intended to
alert the user to the presence of
important operating and
maintenance (servicing)
instructions in the manual
accompanying the unit.
remove screws. The unit does not contain
any user-serviceable parts. Please leave all
maintenance work to qualified personnel.
expose dangerous voltages.
socket before cleaning.
abrasive cleaning solutions as these may
damage the unit's surface.