Table of Contents
Advertisement
1. Introduction and Installation
L If the paper is not inserted correctly,
readjust the paper, or the paper may jam.
Correct
Installation (Handset)
1.11 Battery installation
1
Insert the battery, matching the correct
polarity (1), then push the battery down into
the compartment (2).
2
Close the battery cover.
1.12 Battery replacement
If battery performance diminishes, make sure
you have cleaned the charge contacts and fully
charged the battery. After recharging, if
"Recharge battery" is displayed and/or
0688754 continues to flash, or "Charge for
16
Incorrect
1
2
For Fax Advantage assistance, call 1-800-435-7329.
15HRS" and 68885 are displayed after just a few
calls, the battery needs to be replaced.
Please use only Panasonic batteries. See
page 9 for accessory information.
L Only use rechargeable batteries. If you
install non-rechargeable batteries and
start charging them, the batteries may
leak electrolyte.
1
Press the arrow on the battery cover firmly,
and slide the cover.
2
Remove the old battery. Insert the new
battery and close the cover (see the battery
installation procedure on page 16).
Attention:
A nickel cadmium battery that is recyclable,
powers the product you have purchased.
At the end of its useful life, under various state
and local laws, it is illegal to dispose of this
battery into your municipal waste stream.
Please call 1-800-8-BATTERY for information on
how to recycle this battery.
1.13 Belt clip
You can hang the handset on your belt or pocket
using the belt clip.
- Quick Links:
- Ink Film
Hide quick links:
Advertisement
Table of Contents
