Bosch BSG7....GB Instructions For Use Manual

Hide thumbs Also See for BSG7....GB:

Advertisement

BSG7....GB
Instructions for use

Advertisement

Table of Contents
loading

Summary of Contents for Bosch BSG7....GB

  • Page 1 BSG7..GB Instructions for use...
  • Page 3: Table Of Contents

    Intended use ............... .5 Safety information .
  • Page 5: Intended Use

    Please keep this instruction manual. Do not use the vacuum cleaner if it is damaged. Please pass on this instruction manual if you pass this Unplug the power cord from the mains if a fault is vacuum cleaner on to a new owner. detected.
  • Page 6: Your Vacuum Cleaner

    Your vacuum cleaner 14 Filter foam 1 Adjustable floor tool with locking collar 15 Filter holder for micro-hygiene filter 2 Hard-floor brush with locking collar * 16 Electronic slide control 3 Turbo brush for floor 17 Swing handle; also used as an ON/OFF button and 4 Turbo brush for upholstery carrying handle 5 Telescopic tube with adjusting sleeve and locking...
  • Page 7: Setting Up

    Setting up Before using for the first time Push the handle onto the flexible hose until it engages. CLICK! Insert the flexible hose connector into the opening on the vacuum cleaner until it engages. Push the handle into the telescopic tube until it engages. Push the telescopic tube straight into the connecting piece of the floor tool until it engages.
  • Page 8 Setting up Release the telescopic tube by moving the adjusting sleeve/sliding switch in the direction of the arrow and adjust the tube to the required length. Take the mains plug, pull the mains cable to the required length and insert the plug into a wall socket.
  • Page 9: Vacuuming

    Vacuuming The required suction power can be selected infinitely variably by adjusting the slide control. Lowest suction range: For vacuuming delicate fabrics, e.g. curtains. suction range: For cleaning carpets and when there is little dirt. Medium suction range: For vacuuming durable floor coverings, hard floors and for heavily soiled surfaces.
  • Page 10 Vacuuming a) Upholstery nozzle For cleaning upholstered furniture, curtains, etc. b) Furniture brush For vacuuming picture frames, books, delicate furniture, etc. Small accessories that you do not need can be stored in the vacuum cleaner lid. Turbo brush for upholstery Connect the turbo brush to the handle.
  • Page 11 Vacuuming Cut off any wrapped around hair or threads using a pair of scissors. Then vacuum up the threads and hair using the corner nozzle. Turbo brush for floor Fit the turbo brush onto the suction pipe. Vacuuming with the brush Please observe! Only vacuum using the brush on full suction power, i.e.
  • Page 12 Vacuuming Only brush the fringes in the direction of the arrow. Maintenance Always switch off the vacuum cleaner and pull out the plug before performing any maintenance work. Remove the turbo brush from the suction / telescopic pipe. Cut off any wrapped around hair or threads using a pair of scissors. Then vacuum up the threads and hair using the corner nozzle.
  • Page 13 Vacuuming Open chamber Insert the front lips to reassembly the lower cover Push the cover up to click. Please observe! Never operate the turbo brush without the lower cover or with the lower cover not well locked.
  • Page 14 Vacuuming Hard-floor brush For vacuuming hard floor coverings (tiles, parquet flooring, etc.) Push the telescopic tube into the connecting piece of the hard-floor brush until it engages. Press on the locking collar and pull out the telescopic tube to disconnect. Cleaning the hard-floor brush Vacuum from below to clean the brushes.
  • Page 15 Vacuuming Cut through threads and hairs wound round the rollers using scissors. Vacuum threads and hairs with the crevice nozzle. After cleaning, insert the brush rollers back into the hard-floor tool and click into place. * Only for model BSG72233GB...
  • Page 16 Vacuuming The tool connector can be removed if the vacuum channel becomes blocked. Place the brush with the suction opening facing upwards, push the guide at the side of the wheel slightly outwards and pull the tool con nector upwards and away from the brush. When refitting the connector, make sure that it is correctly seated and that it engages correctly in the guide.
  • Page 17 Vacuuming You can use the parking aid on the back of the appliance during short pauses in vacuuming after switching off the vacuum cleaner. To do this, slide the catch on the floor tool into the groove on the back of the appliance.
  • Page 18: When The Work Is Done

    When the work is done Rewinding the power cord. Tug the power cord and let go (the cable automatically rewinds). To store or transport the vacuum cleaner, use the storage aid on the underside of the cleaner. Stand the vacuum cleaner up on its end. Slide the catch on the floor tool into the groove on the underside of the appliance.
  • Page 19 When the work is done Press on the locking collar and pull out the telescopic tube to disconnect.
  • Page 20: Changing The Dust Bag And Filters

    Changing the dust bag and filters Replacing the dust bag If the dust bag change indicator is completely yellow when the floor tool is lifted from the floor and the highest suction power is selected, the dust bag must be changed, even if it is not yet full. In this case it is essential to change the dust bag due to the type of material it contains.
  • Page 21 Changing the dust bag and filters Cleaning the motor protection filter The motor protection filter should be cleaned at regular intervals by tapping it or washing it out. Open the dust compartment cover. Remove the motor protection filter in the direction of the arrow. Empty the motor protection filter by tapping it.
  • Page 22 Changing the dust bag and filters Replacing the exhaust filter You must replace the exhaust filter in your vacuum cleaner once a year. Replacing the HEPA filter If your vacuum cleaner is equipped with a HEPA filter, this should be replaced once a year.
  • Page 23 Changing the dust bag and filters For using the attached micro - filters please insert them into the filter holder which is enclosed. Open the dust bag compartment lid Unlock the exhaust filter by pushing the locking tab in the direction of the arrow and remove it from the vacuum cleaner.
  • Page 24: Care

    Changing the dust bag and filters Replacing the micro-hygiene filter The micro hygiene filter should be changed when starting a new pack of bags. Open the dust bag compartment lid Unlock the filter holder by pushing the locking tab in the direction of the arrow.
  • Page 25: Replacement Parts And Accessories

    Replacement filter pack BBZ52AFGXL Typ GXL Contents: 5 filter bags with lock 1 micro-hygiene filter http://www.dust-bag-bosch.com Textile dust bag (permanent dust bag) BBZ10TFG Reusable bag with Velcro fastener. HEPA filter (Class H12) BBZ152HF Recommended for allergy sufferers. Ensures very clean exhaust air.
  • Page 26 Replacement parts and accessories TURBO-UNIVERSAL ® brush for floors BBZ102TBB All-in-one brushing and vacuuming of shallow-pile rugs and carpets and all hard floor coverings. Especially suitable for picking up pet hair. The brush roller is driven by the air flow through the vacuum cleaner. No separate electrical connection is needed.
  • Page 30 Conditions of guarantee For this appliance the guarantee conditions as set out by our representatives in the country of sale apply. Details regarding same may be obtained from the dealer from whom the appliance was purchased. For claims under guarantee the sales receipt must be produced.
  • Page 31 This appliance is labelled in accordance with European Directive 2002/96/EG concerning used electrical and electronic appliances (waste electrical and electronic equipment - WEEE). The guideline determines the framework for the return and recycling of used appliances as applicable throughout the EU.
  • Page 36 Printed on recycled paper The design of this product is environment-friendly. 9000 372 856 A All plastic parts are identified for recycling purposes...

Table of Contents