Pioneer DVJ-X1 Training Manual page 23

How to quit Service mode
Press the MASTER TEMPO button to quit Service mode.
List of error codes
When an error is detected, one of the following error codes is displayed on the FL display.
Error code
E-7001 ATAPI system (drive) error
E-7002 DMA FPGA device error
E-7003 CAP FPGA device error
E-7004 CAP FPGA memory error
E-7005 VMC FPGA device error
E-7006 VMC FPGA memory error
E-7007 AV1 device error
E-7008 GSL device error
E-7009 GSL memory error
E-7010 TI DSP device error
E-7011 MOT DSP device error
E-7012 TE4300 device error
E-7013 VDEC device error
E-7014 VDEC memory error
E-7017 AV1 memory error
E-7015 FPGA download error
E-7016 "No ID number" input error
E-7202 Incompatible region number
E-7201 TOC not readable
E-8301 Error during startup
E-8302 Error during playback
E-8303 Other error of the player section
E-9101 Error in mechanical operations The error indication is cleared when
Warning indications
The following warning indications are displayed on the FL display.
Warning display
ROM ERROR This is displayed when any abnormality is detected in the program area of the flash memory.
DRIVE ERR This is displayed when any abnormality is detected in the player section during initialization.
NOT VIDEO FORMAT This is displayed when a DVD other than video-formatted DVDs (VR format, DVD-A, etc.) is loaded.
DISABLE DJ MODE This is displayed during DVD playback in DJ mode, while the areas that cannot be controlled in DJ mode are
being played back.
Description
Unrecoverable: Turn the power off.
The error indication will be cleared.
Unrecoverable: Turn the power off.
The error indication will be cleared.
The error indication is cleared when
the EJECT process is finished.
The error indication is cleared when
the EJECT process is finished or
startup is completed successfully.
the EJECT process is finished or
LOAD IN is completed.
Check the connection with the player section.
Displayed when a device error is reported by the
CPU during communication upon initialization.
Check the connection, power voltage, and clock
waveform of the device in failure.
Check the device and the serial-communication system.
Input the ID number.
A disc having an incompatible region number was loaded.
Apart from abnormality of the player section,
defectiveness of the disc may be the cause.
Check the slot mechanical system.
Description
23
Checkpoint