Shark S4701 Series Owner's Manual page 3

Shark 2-in-1 blast & scrub steam pocket mop
Table of Contents

Advertisement

12. DO NOT handle plug or Steam Mop with wet
hands or operate the Steam Mop without
wearing shoes.
13. DO NOT pull or carry by cord, use cord as
a handle, close a door on cord, or pull cord
around sharp edges or corners. Do not run
Steam Mop over cord. Keep cord away from
heated surfaces.
14. DO NOT unplug by pulling on power cord. To
unplug, grasp the plug not the power cord.
Do not use extension cords or outlets with
inadequate current-carrying capacity.
15. DO NOT put any objects into the the Steam
Nozzle openings. Discontinue use if the steam
nozzle is blocked.
16. DO NOT put hands or feet under the Steam
Mop—it gets very hot.
17. When mopping, use ONLY on flat, horizontal
surfaces. Do not use on walls, counters,
or windows.
18. DO NOT use on leather, wax-polished furniture,
synthetic fabrics, velvet, or other delicate,
steam-sensitive materials.
19. DO NOT use on electronics, such as televisions,
video game consoles, and cable boxes.
20. DO NOT add cleaning solutions, vinegar,
scented perfumes, oils, or any other chemicals
to the water used in the Steam Mop as this
may damage it or make it unsafe for use. If you
live in a hard-water area, we recommend using
distilled water in your Steam Mop.
21. Never leave any wet Cleaning Pad in one
spot while using or storing for any period of
time, as this may damage your surfaces.
22. Carefully remove all Cleaning Pads after you have
unpluged and allowed the Steam Mop to cool.
23. When cleaning the exterior of the Steam Mop,
unplug the power cord from the electrical outlet
and clean with a dry or damp cloth. Do not pour
water or use alcohol, benzene, or paint thinner on
the Steam Mop.
24. Extreme caution should be exercised when
using the Steam Mop to clean stairs.
25. Keep your work area well lit.
26. Store Steam Mop indoors in a cool, dry place.
27. To avoid circuit overload, do not operate another
appliance on the same socket (circuit) as the
Steam Mop.
29. To avoid scalding injuries, always unplug and
allow the Steam Mop to cool before removing or
changing Mop Heads, Accessories, or Cleaning
Pads.
WARNING:
designed to clean hard-floor surfaces that will
withstand high heat. Do not use on unsealed
wood or unglazed ceramic floors. On surfaces
that have been treated with wax and on some
no-wax floors, the sheen may be removed
by the heat and steam action. It is always
recommended to test an isolated area of the
surface to be cleaned before proceeding. We
also recommend that you check the use and
care instructions from the floor manufacturer.
SAVE THESE
INSTRUCTIONS
Your Steam Mop is
www.sharkclean.com
2

Advertisement

Table of Contents
loading

Table of Contents