Page 1
Festool Group GmbH & Co. KG Wertstraße 20 D-73240 Wendlingen Telefon: 07024/804-0 Telefax: 07024/804-20608 http://www.festool.com Originalbetriebsanleitung Original operating manual Notice d’utilisation d’origine Manual de instrucciones original Istruzioni per l’uso originali Originele gebruiksaanwijzing Originalbruksanvisning Alkuperäiset käyttöohjeet Original brugsanvisning Originalbruksanvisning Manual de instruções original Оригинал...
Page 4
fi ne sanded; with Before starting up, please observe the the Type BS 75 E - Set, using the sanding frame, following high-grade workpiece surfaces such as veneers Safety note etc., can be sanded.
Page 5
Electronic adaptation of belt speed on Wear safety glasses when sanding metal. types BS 75 E The control electronics permits the in- Noise/vibration information fi nitely variable adaptation of the belt Measured values determined according to speed. EN 60745. Typically the A-weighted noise levels...
Page 6
0.4 mm). For working with the protection of the environ- When interrupting or on completing work, the ment in mind it is advisable to use the Festool sander is raised from the working position (2.3) dust extraction system.
Page 7
(3.2) removed. The accessory and tool order number can be found A sanding support for rough work at high removal in your Festool catalogue or on the Internet under rates is available. “www.festool.com”. The belt sander requires practically no mainte- nance.
Need help?
Do you have a question about the BS 75 and is the answer not in the manual?
Questions and answers