Pioneer VSW-1 Service Manual page 45

5
Connection Panel
PLAYER B
COMPOSITE
COMPONENT
Y
1. PLAYER B connectors
Use to connect this unit to player B (DVJ-X1).
COMPOSITE
Composite video input connector (RCA pin jack x 1).
Use video cable (provided with DVJ-X1) to connect to player B's VIDEO
OUT connector.
S
S-Video input connector (4-pin mini DIN connector x 1).
Use a S-Video cable (sold separately) to connect to the player B's
S-Video VIDEO OUTconnector.
COMPONENT
Component video input connectors (BNC connectors x 3).
Use 3 BNC plug coaxial cables (sold separately) to connect to player
B's component video output connectors (Y, C
PL CONT
Player control connector, used to control player, fader start and other
operations (minijack x 1).
Use the control cable (provided with DVJ-X1) to connect to player
B's CONTROL connector.
SYNC
Video sync signal output connector (BNC connector x 1).
The sync signal is used to synchronize video signals between players
A and B, thus preventing video distortion resulting from mix-matched
signals when switching between images.
Use the BNC plug coaxial cable (furnished with this unit) to connect
to player B's SYNC INconnector.
2. Player B control input connector (MIXER)
PL B CONT
Intermediary connector for player control signals (for fader start, etc.)
from the DJ mixer (minijack x 1).
Use the control cable (furnished with this unit) to connect to the CON-
TROLconnector of the channel which will control the DJ mixer's player
B.
3. PLAYER A connectors
Use to connect this unit to player A (DVJ-X1).
COMPOSITE
Composite video input connector (RCA pin jack x 1).
Use a video cable (supplied with DVJ-X1) to connect to player A's
VIDEO OUTconnector.
S
S-Video input connector (4-pin mini DIN connector x 1).
Use a S-Video cable (sold separately) to connect to the player A's
S-Video VIDEO OUTconnector.
COMPONENT
Component video input connectors (BNC connectors x 3).
Use 3 BNC plug coaxial cables (sold separately) to connect to player
A's component video output connectors (Y, C
5
6
1 2 3
MIXER PLAYER A
COMPOSITE
S PL CONT PL B CONT S
COMPONENT
C / P C / P SYNC Y C / P
B B R R B
/P , C /P ).
B B R R
/P , C /P ).
B B R R
6
7
4 5
MIXER VIDEO OUT
COMPOSITE
PL CONT PL A CONT S
C / P SYNC Y C / P
B R R B B
PL CONT
Player control connector, used to control player, fader start and
otheroperations (minijack x 1).
Use the control cable (provided with DVJ-X1) to connect to player
A'sCONTROL connector.
SYNC
Video sync signal output connector (BNC connector x 1).
The sync signal is used to synchronize video signals between players
A and B, thus preventing video distortion resulting from mix-matched
signals when switching between images.
Use the BNC plug coaxial cable (furnished with this unit) to connect
to player A's SYNC INconnector.
4. Player A control input connector (MIXER)
PL A CONT
Intermediary connector for player control signals (for fader start, etc.)
from DJ mixer (minijack x 1).
Use the control cable (furnished with this unit) to connect to the CON-
TROL connector of the channel that will control the DJ mixer's player
A.
5. VIDEO OUT connectors
Connect to video monitor.
Note:
In order to produce the various video system outputs, the same input
system signals are necessary (the unit does not perform video signal
conversion).
COMPOSITE
Composite video output connector for player A or player B as se-
lected by this unit (RCA pin jack).
S
S-Video output connector for player A or player B as selected by this
unit (4-pin mini DIN connector).
In order to support very quick switching of video signals, this unit
does not support S2 video signals.
Y, C /P , C /P
B B R R
Component video output connectors for player A or player B as se-
lected by this unit (BNC connectors x 3).
6. CHROMA SYNC selector switch
Use to select chroma signal phase comparator. Set this in accord-
ance with the setting of the main monitor connected to the video
output connectors.
S
Sets chroma signal phase comparator to S-V ideo.
COMPOSITE
Sets chroma signal phase comparator to composite video signal.
COMPONENT
Phase comparison is not performed. Use this position when using
components other than DVJ-X1.
VSW-1
7
8
6
CHROMA SYNC
COMPOSITE
COMPONENT
S
C / P
R R
8
A
B
C
D
E
F
45