Trouble Shooting; Before You Call For Service - Danby DWC257BL Owner's Manual

Before You Call For Service

Problem
No Power.
Cabinet Temperature
too High.
Condensation on the
cabinet and/or doors.
If none of the above has rectified the situation please contact our customer care
Tr o u b l e S h o o t i n g
Possible Cause What to do
A fuse in your home may
be blown or the circuit
breaker tripped.
Power surge.
Plug not fully inserted into
wall outlet.
Temperature setting.
Door not shut properly
or opened excessively.
Recently added a large
quantity of warm beverages
to the cabinet.
High humidity conditions
in the home.
Door not shut properly
or opened excessively.
department at 1 - 8 0 0 - 2 6 3 - 2 6 2 9
10
Replace fuse or reset circuit breaker.
Unplug the Wine Cooler, wait a
few seconds and then plug it back in.
Make sure the 3-prong plug is fully
inserted into outlet.
Verify the temperature control setting
and adjust if neccessary.
Ensure that the door is fully closed
and that the gasket is sealing against
the cabinets. Open the doors only as
needed and for short periods of time.
Limit the quantity of warm beverages
being introduced to the cabinet at the
same time. Attempt to stagger the
load introduction if possible.
The condensation will subside once
humidity conditions return to normal.
Ensure that the door is fully closed
and that the gasket is sealing against
the cabinets. Open the door only as
needed and for short periods of time.