Table of Contents
Advertisement
It is also possible to play two sounds at the same time, selecting them from the top and the bottom
row, for example SSP30 ELECTRIC and PAD.
-
To select the SSP30 ELECTRIC sound press and hold the related button .
-
While holding down the SSP30 ELECTRIC button also press the SELECT button to select
the upper row.
-
Release now the SELECT button and while holding the SSP30 ELECTRIC button press
the PAD button .
-
The two sounds are now selected and they can be played at the same time.
It is possible to change the balance using the [/\] and [\/] buttons.
The Value 4 refers to the SSP10 ELECTRIC volume and the value 1 refers to the PAD sound.
Use the [/\] and [\/] buttons it is possible to balance the two sounds according to the following
table.
4 – 1
4 – 2
PLAYER CHOICE
In this two buttons it is possible to load any of the internal sounds available in the instrument.
If the SELECT button Led is Off you can select PLAYER CHOICE 1. If the SELECT button Led is
On you can select PLAYER CHOICE 2.
4 - 3
4 - 4
7
3 – 4
2 – 4
1 – 4
Advertisement
Table of Contents
