Samick SSP30 Owner's Manual page 13

Use the [/\][\/] buttons to set the desired Pitch value. The PITCH value on the display can be
changed between –64 and +63.
Press the PITCH button On and press the [/\][\/] buttons at the same time to restore the instrument
pitch to 0.
METRONOME
The Metronome is a convenient feature for practice, and it can also provide a rhythmic guide when
recording.
The metronome sound is alternately turned on and turned off by pressing the [METRONOME]
button.
The Time Signature of the metronome can be set by using [/\][\/] buttons when turning on the
metronome function and while the Time Signature value is indicated on the display.
To set the Time Signature (1/4, 2/4, 3/4, 4/4, 6/4, 3/8, 6/8, 9/8 ) press and hold the
[METRONOME] button and the values of Time Signature will be indicated on the display, use the
[/\][\/] buttons to select the new value.
To change the Tempo use the [/\] [\/] buttons to set the desired tempo speed while the metronome is
playing.
OVERALL PRESETS
The instrument can store 24 Overall Preset (6 groups x 4 banks of panel settings).
By pressing the corresponding memory button, you can recall these settings rapidly. You can
customise the panel settings to accommodate your performance and store them to the registration
memory positions.
These settings will not be lost, even if the power is turned OFF.
It is possible to load up to 24 Overall Presets using the 6 Memory positions and 4 memory banks.
By pressing the [STORE] button four times, you can select 4 different banks. The display shows
the available memory banks [1 to 4 Memory Bank].
The following parameter can be saved: Left/Right Sounds, Volume levels, Octave, Effects, etc.
Other global parameters are also memorized.
- Select the desired sounds, volume and effects.
- Select the Memory Bank where to store the new settings by pressing a few times the
[STORE] button, for example BANK 3.
13