Table of Contents
Advertisement
Compatibility, please go to http://www.fcc.gov/cgb/dro.
Turning on the HAC Setting
To turn on the HAC function, touch the Home Key >
>
Settings > Call settings and check Hearing aids.
This section applies to T-Rating only and hearing aids that
contain telecoils. When the HAC setting is on, your Z955A
sends the audio from your phone calls to the telecoil rather than
to the microphone of your hearing aid. You are likely to hear
calls much better because volume is increased and background
noise and feedback are diminished. The HAC setting improves
only the calls you listen to through the earpiece. It does not
affect calls heard on the speaker or with a headset. HAC
requires extra battery power, so watch your battery
consumption when it's turned on.
CAUTION:
Do not turn on the HAC setting unless you use a hearing aid
with a telecoil. Using this setting without a hearing aid or with a
hearing aid without a telecoil may be harmful to your hearing.
160
Advertisement
Table of Contents
