Swann SWADS-140DCM Instruction Manual page 19

Options
Motion Detection Select the motion detection sensitivity
Stamp Speed Off
to enable the camera's motion detection
feature. This feature is handy when you
want to keep your vehicle protected when
it's parked.
To start Motion Detection recording,
simply press and hold the OK button when
your camera is on standby in Video mode
until a 10-second countdown is initiated
on the screen. After the countdown ends,
the icon appears in the status bar.
Your camera will automatically record a
30-second video clip each time it detects
movement.
Note: For longer camera battery life,
we recommend enabling the LCD Power
Save setting in conjunction with Motion
Detection.
To end Motion Detection recording,
simply press and hold the OK button for 3
seconds. The
status bar.
Select the maximum speed limit to
automatically hide GPS speed and location
coordinates from the recording when this
speed limit has been exceeded.
CAMERA SETTINGS
icon disappears from the
19