•
You can take a snapshot without interrupting the video
recording by pressing
the Photo Album screen in Photo mode - see page 14.
•
You can manually stop an ongoing recording by pressing
. Check the time label icon in the status bar to see how
much recording time is available based on the current
video quality setting. To start a new recording, press
•
Motion Detection recording is available when your car
is parked. For more information on how to enable this
feature, see "Motion Detection" on page 19.
Protecting videos
•
If you have just captured something important on the
camera and want to protect the relevant video clips, simply
press
. The
camera locks the previous and current video clips of the
ongoing recording so they do not get overwritten.
•
Your camera can also automatically detect collisions and
hard brakings using its integrated G-sensor, and activate
the
function. To enable the G-sensor feature, go to
Settings screen > Video tab > Protect Level and select the
sensitivity level.
Audio recording
•
By default, ambient sounds are recorded through the
camera's built-in microphone. You can turn off audio
recording by pressing
bar when audio recording is disabled.
GPS connection
•
The GPS icon turns green once a fix on your location is
established. The GPS works best when it has a clear view
of the sky to receive signals from the satelites.
. You can view your snapshots on
icon appears in the status bar. Your
. The
USING YOUR CAMERA
icon appears in the status
.
11