Samsung NE58K9560 Series User Manual page 51

about 5°
Fig. 1
Fig. 2
NE58K9560WS_AA_AC_DG68-00722A-01_EN.indd 51
3. Firmly grasp both sides of the door at
the top.
4. Close the door to the door removal
position, which is approximately
5 degrees from vertical (Fig. 1).
Lift door up and out until the hinge arm
5.
is clear of the slot (Fig. 2).
How to re-install the door
Hinge arm
Bottom
edge of
slot
Indentation
1. Firmly grasp both sides of the door at the top.
2. With the door at the same angle as the removal position, slide the indentation
of the hinge arm into the bottom edge of the hinge slot. The notch in the
hinge arm must be fully inserted into the bottom of the slot.
Unlocked position
3. Open the door fully. If the door will not open fully, the indentation is not
inserted correctly in the bottom edge of the slot.
4. Push the hinge locks up against the front frame of the oven cavity to the
locked position.
5. Close the oven door.
Hinge lock
Locked position
English 51
1/28/2016 6:04:31 PM