Application Examples; Using A Mixing Console; Using Several B212A/B215A Loudspeakers; Direct Connection Of A Stereo Signal Source - Behringer B212A User Manual

EUROLIVE B212A/B215A
Fig. 2.2: Control elements and connections (B212A and B215A)
{9} You can replace fuses at the FUSE SWITCH of the B212A/
B215A. Always replace fuses with the same type. Please
follow the instructions given in chapter 5 "Specifications."
(10) The mains connection is established using a cable with an
IEC mains connector. This cable is delivered with the B212A/
B215A. To avoid ground-loop hum, loudspeakers and mixing
consoles should be connected to the same power circuit.
(11) Press POWER to turn on your B212A/B215A.
The POWER switch does not fully disconnect the unit
+
from the mains. To disconnect the unit from the mains,
pull out the main cable plug or appliance coupler. When
installing the product, ensure the plug or appliance
coupler is readily operable. Unplug the power cord
completely when the unit is not used for prolonged
periods of time.
(12) SERIAL NUMBER
6
3.

Application examples

+ Turn the LEVEL control fully to the left before you switch
on the unit with the POWER switch. Then, raise the
volume to a suitable level.
3.1

Using a mixing console

A common way to use 2 B212A/B215A loudspeakers is with a
mixing console. In this case, connect each of the main outputs
that are on the mixing console to a B212A/B215A loudspeaker.
The B212A/B215A includes XLR and ¼" connectors. To avoid
interference, use only XLR or ¼" jack cables.
3.2

Using several B212A/B215A loudspeakers

Fig. 3.1: Wiring several B212A/B215A loudspeakers using the
LINK OUTPUT connector
For larger rooms, you can connect several B212A/B215A speakers
using the LINK OUTPUT connector {3} (see fig. 3.1).
3.3

Direct connection of a stereo signal source

When you use two B212A/B215A loudspeakers, you can directly
connect one stereo signal source, for example, a CD player. In
this case, each of the speakers is connected to 1 signal-source
output. (If necessary, use the appropriate adaptor.)
Application examples