Page 1
BLP-1 & BTP-1 Turntable System Owner’s Manual...
Page 2
As of 2006-02-22 Bryston will only warranty Bryston products purchased through authorized Bryston dealers. Bryston products with a date code of 0608 or higher (date code format is “yyww”, where “yy” is the two least significant digits of the year and “ww” is the week of the year) must be accompanied by a copy of the bill-of-sale from a Bryston authorized dealer to qualify for warranty service.
• Mass-loaded rigid 2-speed turntable Welcome • Included outboard BTP-1 Bryston custom motor Thank you for your purchase of a Bryston BLP-1 power supply with selectable speeds analog turntable system! Extensive research and • Low-noise synchronous 33/45 motor with highly...
Replacement packing materials Assembly consisting of a shipping carton with plastic foam Now that the BLP-1 and BTP-1 are unpacked, inserts is available from Bryston for a small fee. select the final location of your turntable system and prepare for assembly. This location should be...
In general, the tonearm should be was purchased. Bryston recommends you at least between parallel with the platter and having a have a stylus force gauge to set vertical tracking gentle downward slope toward the cartridge.
Azimuth Adjustment supplies power to the motor and regulates the speed at which it spins. The BLP-1 motor has a Loosen the two small hex head set screws on either permanently affixed cable terminated with a mini side of the headshell collar. Rotate the headshell...
Tuning and Maintenance Your BLP-1 is designed with care and will provide many years of outstanding playback with little maintenance required. The belt is made from NBR and should be checked once every two years and replaced if required.